american ring true manufacturing solutions

5002-354 Retaining Ring Spec Sheet

Part Number: 5002-354

5002 Series - Bevelled Edge Internal Rings

View as a PDF


Display Units: inches  |  metric
Ring Specs

(D) Free Diameter: 99.97 +1.40 / -1.40 mm.
(t) Thickness: 2.77 +0.08 / -0.08 mm.
(b) Radial Wall:
Groove Specs:

(B) Application Diameter: 90.0 mm.
(G) Groove Diameter: 96.67 +0.15 / -0.00 mm.
(W) Groove Width: 2.26 +0.05 / -0.00 mm.
Groove Depth: 3.34 mm.
Other Specs

Approximate Weight per 1000:
(C) Clearance Diameter When Sprung Into Bore:72.39mm.
(C1) Clearance Diameter When Sprung Into Groove:75.44mm.
(Pg) Theoretical Thrust Load Capacity - Groove Yield:
Notes: Yield Strength of Groove Material (Ys): 310 MPa. Calculated using a safety factor (K) of 2

Equation:
Pg = [ B * (d/2) * Ys * pi ] / K
    = [ (89.99 mm.) * ((3.34 mm.) / 2)* (310 MPa) * 3.14 ] / 2
73,481N
(Pr) Theoretical Thrust Load Capacity - Ring Shear:
Notes: Ring Material1: Carbon Spring Steel (SAE 1060-1090). Shear Strength of Ring Material (Ss): 1,034 MPa. Calculated using a safety factor (K) of 4

Equation:
Pr = [ Cf * B * t * Ss * pi ] / K
    = [ (1.2) * (89.99 mm.) * (2.77 mm.) * (1,034 MPa) * 3.14 ] / 4

1Calculation assumes Carbon Steel for ring material, but Carbon Steel not necessarily available for all parts or sizes.
242,718N
Industry Equivalent Part Number(s):
5002-354
Pliers To Install and Remove 5002-354

Plier Part Number: 7RTip Angle: 0
Plier Part Number: 745RTip Angle: 45
Plier Part Number: 790RTip Angle: 90