american ring true manufacturing solutions

5002-137 Retaining Ring Spec Sheet

Part Number: 5002-137

5002 Series - Bevelled Edge Internal Rings

View as a PDF


Display Units: inches  |  metric
Ring Specs

(D) Free Diameter: 38.76 +0.64 / -0.51 mm.
(t) Thickness: 1.27 +0.05 / -0.05 mm.
(b) Radial Wall:
Groove Specs:

(B) Application Diameter: 34.9 mm.
(G) Groove Diameter: 37.47 +0.10 / -0.00 mm.
(W) Groove Width: 1.04 +0.03 / -0.00 mm.
Groove Depth: 1.27 mm.
Other Specs

Approximate Weight per 1000:
(C) Clearance Diameter When Sprung Into Bore:25.15mm.
(C) Clearance Diameter When Sprung Into Bore:25.15mm.
(C1) Clearance Diameter When Sprung Into Groove:26.16mm.
(C1) Clearance Diameter When Sprung Into Groove:26.16mm.
(Pg) Theoretical Thrust Load Capacity - Groove Yield:
Notes: Yield Strength of Groove Material (Ys): 310 MPa. Calculated using a safety factor (K) of 2

Equation:
Pg = [ B * (d/2) * Ys * pi ] / K
    = [ (34.93 mm.) * ((1.27 mm.) / 2)* (310 MPa) * 3.14 ] / 2
10,800N
(Pr) Theoretical Thrust Load Capacity - Ring Shear:
Notes: Ring Material1: Carbon Spring Steel (SAE 1060-1090). Shear Strength of Ring Material (Ss): 1,034 MPa. Calculated using a safety factor (K) of 4

Equation:
Pr = [ Cf * B * t * Ss * pi ] / K
    = [ (1.2) * (34.93 mm.) * (1.27 mm.) * (1,034 MPa) * 3.14 ] / 4

1Calculation assumes Carbon Steel for ring material, but Carbon Steel not necessarily available for all parts or sizes.
43,208N
Industry Equivalent Part Number(s):
5002-137
Pliers To Install and Remove 5002-137

Plier Part Number: 3RTip Angle: 0
Plier Part Number: 345RTip Angle: 45
Plier Part Number: 390RTip Angle: 90