american ring true manufacturing solutions

5000-315 Retaining Ring Spec Sheet

Part Number: 5000-315

5000 Series - Internal Retaining Ring With Lugs

View as a PDF


Display Units: inches |  metric
Ring Specs

(D) Free Diameter: 3.523 +0.055 / -0.055 in.
(t) Thickness: 0.109 +0.003 / -0.003 in.
(b) Radial Wall:
Groove Specs:

(B) Application Diameter: 3.149 in.
(G) Groove Diameter: 3.341 +0.006 / -0.006 in.
(W) Groove Width: 0.120 +0.005 / -0.000 in.
Groove Depth: 0.096 in.
Other Specs

Approximate Weight per 1000: 57.000 lbs.
(C) Clearance Diameter Compressed in Housing:2.490in.
(C) Clearance Diameter Compressed in Housing:2.500in.
(C1) Clearance Diameter Released in Groove:2.680in.
(C1) Clearance Diameter Released in Groove:2.690in.
(Pg) Theoretical Thrust Load Capacity - Groove Yield:
Notes: Yield Strength of Groove Material (Ys): 45,000 psi. Calculated using a safety factor (K) of 2

Equation:
Pg = [ Cf * B * d * Ys * pi ] / K
    = [ (1.2) * (3.149 in.) * (0.096 in.) * (45,000 psi) * 3.14 ] / 2
25,629lbs.
(Pr) Theoretical Thrust Load Capacity - Ring Shear:
Notes: Ring Material1: Carbon Spring Steel (SAE 1060-1090). Shear Strength of Ring Material (Ss): 150,000 psi. Calculated using a safety factor (K) of 4

Equation:
Pr = [ Cf * B * t * Ss * pi ] / K
    = [ (1.2) * (3.149 in.) * (0.109 in.) * (150,000 psi) * 3.14 ] / 4

1Calculation assumes Carbon Steel for ring material, but Carbon Steel not necessarily available for all parts or sizes.
48,499lbs.
Industry Equivalent Part Number(s):
5000-315, 5000-315, 5000-315, 5000-315
Pliers To Install and Remove 5000-315

Plier Part Number: 5RTip Angle: 0
Plier Part Number: 545RTip Angle: 45
Plier Part Number: 590RTip Angle: 90
Plier Part Number: 7RTip Angle: 0
Plier Part Number: 745RTip Angle: 45
Plier Part Number: 790RTip Angle: 90