american ring true manufacturing solutions

5000-125 Retaining Ring Spec Sheet

Part Number: 5000-125

5000 Series - Internal Retaining Ring With Lugs

View as a PDF


Display Units: inches  |  metric
Ring Specs

(D) Free Diameter: 35.26 +0.64 / -0.51 mm.
(t) Thickness: 1.27 +0.05 / -0.05 mm.
(b) Radial Wall:
Groove Specs:

(B) Application Diameter: 31.8 mm.
(G) Groove Diameter: 33.78 +0.10 / -0.10 mm.
(W) Groove Width: 1.42 +0.10 / -0.00 mm.
Groove Depth: 1.02 mm.
Other Specs

Approximate Weight per 1000: 2.177 kg.
(C) Clearance Diameter Compressed in Housing:22.23mm.
(C) Clearance Diameter Compressed in Housing:22.48mm.
(C1) Clearance Diameter Released in Groove:24.26mm.
(C1) Clearance Diameter Released in Groove:24.51mm.
(Pg) Theoretical Thrust Load Capacity - Groove Yield:
Notes: Yield Strength of Groove Material (Ys): 310 MPa. Calculated using a safety factor (K) of 2

Equation:
Pg = [ Cf * B * d * Ys * pi ] / K
    = [ (1.2) * (31.75 mm.) * (1.02 mm.) * (310 MPa) * 3.14 ] / 2
18,855N
(Pr) Theoretical Thrust Load Capacity - Ring Shear:
Notes: Ring Material1: Carbon Spring Steel (SAE 1060-1090). Shear Strength of Ring Material (Ss): 1,034 MPa. Calculated using a safety factor (K) of 4

Equation:
Pr = [ Cf * B * t * Ss * pi ] / K
    = [ (1.2) * (31.75 mm.) * (1.27 mm.) * (1,034 MPa) * 3.14 ] / 4

1Calculation assumes Carbon Steel for ring material, but Carbon Steel not necessarily available for all parts or sizes.
39,280N
Industry Equivalent Part Number(s):
5000-125, 5000-125, 5000-125, 5000-125
Pliers To Install and Remove 5000-125

Plier Part Number: 3RTip Angle: 0
Plier Part Number: 345RTip Angle: 45
Plier Part Number: 390RTip Angle: 90